20-horse field for Derby dash

Saturday, May 7, 2005

The 131st run for the roses in Louisville, KY is set for Saturday at Churchill Downs. Post time is 6:04pm EDT under what should be partly sunny skies and a fast track. The 20-horse field contains 10 strong contenders in what promises to be a fast pace out front in the Kentucky Derby.

Trainer Nick Zito, the 2-time derby winner boasts 5 stable horses running the race, and has the odds-on favorite Bellamy Road. The George Steinbrenner owned horse won convincingly in 4 of its last 5 trips. At its #16 post position, it will have to get out quickly, or be on the outside going into the first turn where it would have to fight for position. Given the early starting speed of Spanish Chestnut, it seems unlikely that any horse will easily set the pace.

Showing strong closing in its last 4 races is Bandini, ridden by top New York jockey John Velazquez, a 6-time Breeder’s Cup winner. If this horse can hold onto the pace, watch for him at the finish line.

For today’s 1 ¼ mile race, Jeremy Rose on Afleet Alex looks dangerous, where both horse and jockey are experienced. But it was Wilko who prevailed in their meeting at the Breeders’ Cup Juvenile last October.

A Chicago Tribune computer analysis predicts a win for High Fly, based on its “lack of flaws”. In that prediction they note criteria on which it was calculated, but nothing accounts for the race day excitement of roaring crowds in these 3-year-old thoroughbreds.

Last year the jammed Churchill Downs drew 140,000 people on a rainy Saturday to watch Smarty Jones win. The Derby run is the first leg in USA horse racing’s Triple Crown. The last horse to win the triple crown was Affirmed in 1978.

Retrieved from “https://en.wikinews.org/w/index.php?title=20-horse_field_for_Derby_dash&oldid=433978”

Posted on January 23rd, 2022 by  |  No Comments »

Australia: Mat Morgan, Greens candidate in South Gippsland, talks climate, tourism, and local issues with Wikinews

Sunday, September 5, 2021

Since June 2019, the people of South Gippsland Shire, located at the southernmost tip of Australia, have been without a local council, after a state government inquiry found “high levels of tension” within the council. Administrators were appointed by the Victorian state government in July 2019, who have governed the shire since then. However, South Gippsland’s council is scheduled to be restored with an election to be held via post from October 5-22, 2021.

Wikinews interviewed one of the candidates standing in this election, Mat Morgan. He is running as a candidate in the Coastal-Promontory Ward, and is endorsed by the Australian Greens. The Coastal-Promontory ward covers towns such as Venus Bay, Waratah Bay, Yanakie, Foster, Port Welshpool, and Toora, and elects three councillors to the South Gippsland Shire Council.

Retrieved from “https://en.wikinews.org/w/index.php?title=Australia:_Mat_Morgan,_Greens_candidate_in_South_Gippsland,_talks_climate,_tourism,_and_local_issues_with_Wikinews&oldid=4645599”

Posted on January 23rd, 2022 by  |  No Comments »

Chicago Transit Authority announces repairs to Blue and Red Line

Wednesday, July 11, 2007

Chicago Transit Authority (CTA) riders on the subway portions of the Red and Blue lines may see relief of the slow zone in the coming months. So-called “slow zones” are locations where trains travel at restricted speeds because of track work or deteriorating conditions.

The CTA is putting nearly US$15 millions towards renovation of the O’Hare to Clark/Lake portion of the Blue Line and Chicago to Belmont portions of the Red Line. Work will happen during off peak and overnight hours. The CTA says that one track operations and delays may occur.

“We have heard our customers’ frustration with slow zones and today we are acting to address their concerns,” said Chicago Transit Board chairperson Carole Brown. “I am pleased that we are able to leverage existing contracts to begin this work and I look forward to working with state lawmakers to increase transit investment to bring our entire system to a state of good repair.”

Retrieved from “https://en.wikinews.org/w/index.php?title=Chicago_Transit_Authority_announces_repairs_to_Blue_and_Red_Line&oldid=461190”

Posted on January 23rd, 2022 by  |  No Comments »

The Benefits And Options On Metal Furniture

Submitted by: John Schofield

Many people choose metal furniture especially for their patios or decks. Nevertheless, furniture made from brass, iron and other metals can also be a good choice for indoor use. You can have a brass bed or iron racks. Your cabinets and tables can also be metal. There are several benefits of having metal furniture and one can definitely have a wide range of options in terms of materials and finishes.

Benefits

The main advantage of metal furniture is its durability. Although wood and other kinds of furniture can be sturdy, nothing can beat the metal s durability. This is why metal furniture is preferred for outdoor use. They can last different kinds of weather and you do not have to worry about the season. Metal furniture can stand sun and rain or even snow. It will not break instantly weather the sun is extremely hot or snowflakes are falling. However, metal furniture should also be taken care of to last longer. Normally, metal furniture can be used for 20 years but it can last up 30 years or more when given the proper care.

[youtube]http://www.youtube.com/watch?v=mtHWPXG55oU[/youtube]

Another benefit of metal furniture is that it is rust and heat resistant. Most metal workers today use techniques to enhance the heat resistance property of metals. Plus, there are techniques to make metals rust free. If you can find heat and rust resistant metal furniture, you are in for a good buy since you will not need a lot of maintenance yet the furniture can last for years.

Materials

There are many types of metals so anyone will have a lot of option in terms of materials. Steel and aluminium are two of the most commonly used metals for furniture making.

Steel is made from carbon, iron, chromium and many other metals. Steel furniture further varies according to thickness. Furniture made from steel is usually pricey. Nevertheless, a lot of shoppers consider it as a good deal because of the above mentioned benefits of metal furniture. In addition, stainless steel furniture needs low maintenance for the thin film of oxide on the furniture s surface. Because of chromium, steel furniture can have protection from rust and corrosion.

Aluminium furniture is much more common. If you want furniture that can stand rust, aluminium is the best choice. It is lighter than steel. It can also be very sturdy especially with the right thickness.

Iron is another common material for furniture. It is best for outdoor furniture such as patios and gardens. It is great if strong winds frequent your area since furniture made from iron is characterized by heavy weight. One disadvantage of iron furniture before is that it does not have a high level of resistance to rust and corrosion. However, with excellent development in the metal work industry, solutions to make it water proof to avoid rust and corrosion has been discovered and applied.

Finishes

Some of the most common finishes for metal furniture are chrome plating, brass, and paint. Chrome plating is durable but is susceptible to rust when scratched and exposed to air. Paint and brass adds strength to furniture but the latter can be expensive.

About the Author:

steel tube stockistsstainless steel stripssteel shop

Source:

isnare.com

Permanent Link:

isnare.com/?aid=889520&ca=Advice

Posted on January 23rd, 2022 by  |  No Comments »

Woman returns home with Christmas turkey, a month after setting out

Tuesday, January 19, 2010

A Scottish woman who set out before Christmas to purchase a turkey finally made it home on Monday, after being cut off by snow for a month. Kay Ure left the Lighthouse Keeper’s cottage on Cape Wrath, at the very northwest tip of Great Britain, in December. She was heading to Inverness on a shopping trip.

However on her return journey heavy snow and ice prevented her husband, John, from travelling the last 11 miles to pick her up. She was forced to wait a month in a friend’s caravan, before the weather improved and the couple could finally be reunited.

They were separated not just for Christmas and New Year, but also for Mr Ure’s 58th birthday. With no fresh supplies, he was reduced to celebrating with a tin of baked beans. He also ran out of coal, and had to feed the couple’s six springer spaniels on emergency army rations.

“It’s the first time we’ve been separated”, said Mr Ure in December. “We’ve been snowed in here for three weeks before, so we are well used to it and it’s quite nice to get a bit of peace and quiet.”

Retrieved from “https://en.wikinews.org/w/index.php?title=Woman_returns_home_with_Christmas_turkey,_a_month_after_setting_out&oldid=3359888”

Posted on January 23rd, 2022 by  |  No Comments »

German tax authority migrating 12,000 desktops to SuSE Linux and KDE

Monday, June 12, 2006

The Lower Saxony, Germany tax authority is migrating 12,000 desktops to use SuSE Linux with KDE as the desktop environment. The systems are being migrated from Sun’s Solaris x86 version 8, which has been in use at the organization since 2002.

According to Eva Brucherseifer, president of the KDE community in Germany and managing director of basysKom, the migration process in its “peak phase” and is porting 300 systems every day. The company basysKom is configuring the desktops.

Brucherseifer said “The decision made by the Regional Tax Office in Lower Saxony represents an important step towards increased flexibility, enhanced usability and — last but not least — reduced training and support costs.”

German cities using or planning to use open source software include Schwäbisch Hall, Mannheim, Treuchtlingen, Leonberg and Isernhagen. Mannheim is planning to deploy Linux on 110 servers and 3,700 desktops.

Retrieved from “https://en.wikinews.org/w/index.php?title=German_tax_authority_migrating_12,000_desktops_to_SuSE_Linux_and_KDE&oldid=2290401”

Posted on January 21st, 2022 by  |  No Comments »

Bottling And Mixing Procedures Of Beverage Production

Bottling and Mixing Procedures of Beverage Production

by

Rob Feckler

Each day around the world, millions of bottled beverages are produced and dispensed. A large aspect of the 0.35 gallons of liquid drunk by an individual per day is beverage. If your job involves vigorous and dehydrating tasks, you are probably drinking even more. But have you ever questioned how these bottled beverages end up in retail outlets? Learning about bottling will make you realize that the drinks you consume are manufactured from a complex method to keep drinking risk-free and healthy for people.

The process is divided into two components container as well as beverage preparation. The filling process with filling equipment then follows. The bottles can| be recycled or remanufactured based on the preference of the filling company based upon the type of beverage they manufacture. Nevertheless, countless firms prefer remanufactured containers to recycled ones because of lesser wellness risks to individuals. Initially, the containers are meticulously cleaned and dried, while the water to be used in producing the drink is detoxified to remove detrimental contaminants.

The sieved water goes through smaller holding containers with connecting tubes to be mixed with additional components that will give the beverage its definitive taste. A few of the most usual components include glucose, sweeteners, fructose, nutraceuticals, and preservatives. These make up the intriguing taste of drink, which may differ depending on the special essence. The outcome is syrup that requires more water to balance the viscosity and taste of the final product.

[youtube]http://www.youtube.com/watch?v=Hou5_w60Lew[/youtube]

When producing carbonated beverages, liquefied carbon dioxide is added into the mixture. This procedure, which is called carbonation imbues the final merchandise an effervescent nature. Fruit juices are mixed with minimal carbon dioxide to maintain the dominance of the fruit essence. Before they\’re put into a

bottling machine

, producers will guarantee that their blend follows stringent quality control requirements. A tiny difference in flavor or carbonation is equal to a drop in consumer satisfaction.

The bottling procedure ordinarily takes place in a different center. Due to the rapid movement of the

bottle filling machines

, there\’s a hazard of mixing particles in the air that may pollute the drink throughout carbonation as well as mixing. This is the reason why bottling is carried out in a spot where it cannot impact the initial procedure. Most companies apply a highly automated process and hence need fewer workers.

After bottling, the bottled drinks are capped making use of a capping machine. This is typically included in the bottling device at the latter parts of the procedure. Mechanical capping is needed for heavy-duty processes to improve productivity. Most

cappers

can seal the caps for safer use.

If you have questions, please visit us at www.FillingEquipment.com for complete details and answers.

Article Source:

ArticleRich.com

Posted on January 20th, 2022 by  |  No Comments »

Ontario Votes 2007: Interview with Libertarian candidate Zork Hun, Parkdale-High Park

Tuesday, October 2, 2007

Zork Hun is running for the Libertarian party in the Ontario provincial election, in the Parkdale-High Park riding. Wikinews’ Nick Moreau interviewed him regarding his values, his experience, and his campaign.

Stay tuned for further interviews; every candidate from every party is eligible, and will be contacted. Expect interviews from Liberals, Progressive Conservatives, New Democratic Party members, Ontario Greens, as well as members from the Family Coalition, Freedom, Communist, Libertarian, and Confederation of Regions parties, as well as independents.

Retrieved from “https://en.wikinews.org/w/index.php?title=Ontario_Votes_2007:_Interview_with_Libertarian_candidate_Zork_Hun,_Parkdale-High_Park&oldid=722519”

Posted on January 19th, 2022 by  |  No Comments »

Fur fans flock to Toronto’s Furnal Equinox 2019

Monday, March 25, 2019

From March 15 to 17, the Canadian city of Toronto played host to the tenth Furnal Equinox, an annual event dedicated to the “furry fandom.” Wikinews attended. Programming ranged from music to gender, science to art, covering dozens of aspects of the varied subculture. The event’s featured guests were visual artists Moth Monarch and Cat-Monk Shiro, as well as the co-owners of US fursuit costume builders Don’t Hug Cacti.

The event raised nearly CDN$11,000 for Pet Patrol, a non-profit rescue organization in Kitchener-Waterloo, Ontario, run by volunteers. This exceeded their goal of $10,000, the funds needed to finish a rural sanctuary. The furry community is well-known for their charitable efforts. Along with direct donations, the funds were raised through a charity auction offering original artwork, and a fursuit design by guests of honour “Don’t Hug Cacti.” Last year, Furnal Equinox raised funds for a farm animal sanctuary.

While only 10–15% of people within the fandom own a fursuit according to a 2011 study, event organizers reported this year 908 of the 2240 attendees at Furnal Equinox brought at least one elaborate outfit to the event. The outfits are usually based on original characters, known as “fursonas”.

Guests of Honour Cherie and Sean O’Donnell, known within the community as “Lucky and Skuff Coyote”, held a session on fursuit construction on Saturday afternoon. The married couple are among the most prominent builders in the fandom, under the name Don’t Hug Cacti. The scale of their business was evident, as Sean had made over a thousand pairs of “handpaws”, costume gloves.

The couple encouraged attendees to continue developing their technique, sharing that all professional fursuit makers had developed different techniques. They felt that they learned more from failed projects than successful ones, citing the Chuck Jones quote that “every artist has thousands of bad drawings,” and that you have to work through them to achieve. Cherie, known as Lucky, recalled receiving a Sylvester the Cat plush toy from a Six Flags theme park at age 10. She promptly hollowed the toy out, turning it into a costume. Creating a costume isn’t without its hazards: the company uses 450°F (232°C) glue guns. They’re “like sticking your hand in an oven.”

Other programming included improv comedy, dances, life drawing of fursuiters, a review of scientific research by a research group at four universities called FurScience, a pin collector’s social, and workshops in writing.

The “Dealer’s Den” hall was expanded this year, with even more retailers and artists. While many offered “furry” versions of traditional products, at least one business focused on “pushing the boundaries of fursuit technology.” Along with 3D printing a bone-shaped name tag when Wikinews visited, Grivik was demonstrating miniature computer screens that could be used as “eyes” for a fursuit. The electronic displays projected an animation of eyes looking around, blinking occasionally. The maker has also developed “a way to install a camera inside suit heads, to improve fursuiter visibility.” He hopes the tech would reduce suiting risks and accidents. Without the need for eyeholes, fursuit makers would have “more options for building different eyestyles.”

Retrieved from “https://en.wikinews.org/w/index.php?title=Fur_fans_flock_to_Toronto%27s_Furnal_Equinox_2019&oldid=4564835”

Posted on January 19th, 2022 by  |  No Comments »

Internal Medicine Doctor Learn All About Them

Actually its not as scary as it might sound. An internal medicine doctor is also known as an internist, not to be mixed up with a doctor in training known as an intern.An internist is highly skilled and trained to diagnosis and treat adult diseases. This is the doctor who specializes in one area of your health and can generally figure out symptoms that can stump your family doctor who does not specialize in one area of the body. Think of Dr. House on the television series and you are on the right page to understand what an internist does. Your internal medicine doctor will generally not be as vague as Dr. House with a specialty though. Many internists specialize in one subspecialty such as a cardiologist who is a heart doctor or a doctor who only treats infectious disease or geriatrics. There are as many sub specialists as there are diseases and body parts to treat and way too many to list here.So a referral to an internist shouldnt be anything to panic you now that you realize that an internal medicine doctor can be someone with the specialty skills and training to treat very specific health issues such as heart disease or infectious disease.Once you get a referral however you should do your own due diligence to make sure the doctor you have been referred to is the doctor you want to see. A simple check can give you information about your internists training, education and skills and help you feel more confident that this is the doctor to help you. If however you dont feel the referral is a good match after you have seen the doctor, be sure to contact your family health professional and request the names of a few other doctors as well. You are perfectly within your rights to get a second or even a third opinion if you are unhappy with your diagnose or the treatment options presented to you.However, you should also remember that an internist is a specialist and they usually know what they are doing and what they are looking at. So if you are getting the same information from your second opinion as you got from your first opinion it may be time to accept a diagnoses and stop looking for a new internist to give you a third or fourth opinion and start working on your treatment plan.

Posted on January 18th, 2022 by  |  No Comments »